Bob, Check out the KIO2 programmers reference guide (www.elecraft.com) to see what the output really is. It is easy to try out the commands using HyperTerminal or some other similar program if you want to see what is happening at the ASCII level.
There are some things like AF Gain and RF Gain settings that are strictly analog hardware controlled and the information is not available through the KIO2 interface. Good luck with it - whatever this killer app may be. 73, Don W3FPR > -----Original Message----- > > Hi Everybody! I have in mind a killer app for the k2 but it would > require that the K2 send an ACSII output every time a parameter was > changed from the K2 by the operator. Is the case or do my creative > juices go down in flames. > Best regards, Bob K7HBG > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
