Folks, It did not take long to deplete my stock of knobs and tires.
You can still get them from Yaesu (see below) > -----Original Message----- > > I have information about the Yaesu FT-900 knob on my website > www.qsl.net/w3fpr, but the phone number is wrong again - I just > can't keep up with Yaesu parts - look them up with a Google > search - as of 2 weeks ago, Yaesu parts were handled by Vertex > Standard, 10900 Walker Street, Cypress, CA 90630 and the phone > number was (714)827-7600. > > Now for the bad news - Yaesu has discontinued the FT-900 knob, > but you can still buy the rubber tire for it. With a bit of > stetching, you can slide the FT-900 tire over the stock K2 knob > and you end up with a nice knob without the sharp front corner. > You can add the FingerDimple (available from Elecraft) if you like them. > > The FT-100 knob is a bit smaller, and does have a recessed > 'finger-hole', and is quite usable on the K2 (many folks like > it), and that is available from Yaesu. I recently bought 3 of > the FT-100 knobs and tires, and have 2 extra FT-900 tires > available. I can send the FT-100 knobs to the first 3 persons > who request them for $18.60 plus shipping ($1 for 1st class mail > or $3.85 for Priority mail). I can ship an FT-900 tire by 1st > class mail for $2 or $4.85 for Priority mail. This is not a > price savings over ordering direct from Yaesu, bu I can save you > a few pennies on the shipping - they ship only UPS and it is a > minimum of $6.36. > > 73, > Don W3FPR > > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
