Guy's..
I've just completed the above part on my K2 .... All "tests" ....seemed to
go according to plan.....
Keepin' my fingers crossed...! SO..! Should Y'all for me ...!!
My Question...
On completing the "test"(s) up to an around Page 50 "something" in the
manual... I proceeded to put my
"baby" back together again in preperation for the next part in the manual...
Only to find...that when I tried to
"mate" the "Front Panel" board, with the "Control Board"...things, don't
want to go back together as planned...!
The "problem" I think ...is that now the "RF Board" is more populated with
componants, and there is a "tuning can"
in componant placement "L34" on the "RF Board"....WHEN ..! I try to "mate"
the "Control Board" onto the given
connectors,....the screws that hold the 2 "transistors" in position(s) "U5"
and "U4" respectivley..protrude out too far
from their nuts..thus inhating the placement of the "Control Board" onto the
connectors on the "RF Board"...
I (am) ..."sorta" sure that I got this part correct ..way back in the
manual... and used the correct screws to hold the
transistors on the "Control Board" as was stated....but for some reason I
can't help but think that the screws used are
either 1... Too Long (i.e not the correct ones to use)....2... Orientated
with their "threads" instead of their "heads" on the
"Control Board"....
Can someone please point me in the correct direction of where I might have
gone wrong... I've asked advice on this
previously and understand what I was told... that was just to turn the
screws around so that the "heads" lay on the transistors,
from the componant side and protruded out the solder side of the "Control
Board"... if this is the case, will I need to do any
reverse stuff with the washers for each transistor...??
Thanks guys for the bandwidth.....
Andy
[EMAIL PROTECTED] "...I Just See It.!.." John A. Ross
(RSD Communications circa 2004)
A.R.S.
GM0NWI QRP "..It is vain to do with
more.... "A Dis-Orientated Kiwi...
"K2 S/n 01432 Soon To Be On-Air" what can be done with
less.. In The Northern Hemisphere..."
GQRP No.9576
QRP-L No.2165
ARCI No.10561
Central Florida DX Association (CFDXA)
Alaska QRP Club No.190
Flying Pigs QRP Club No. FP#-1061
ICQ No.31899603
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
