If you really want to get your K3 right on target with the Ref. Cal setting, 
you can use a free program called Spectrogram and set up marker tones at your 
pitch freq. and 100Hz above your pitch freq.  Set your rig on WWV and match the 
peaks of the tones to the markers... Once you have those centered perfectly on 
the markers you'll be within .05Hz.  Doesn't get too much better than that.
Be sure to let your rig warm up for about an hour before you make the 
adjustments.
 
> Date: Wed, 19 May 2010 14:45:25 -0400
> From: [email protected]
> To: [email protected]; [email protected]
> Subject: Re: [Elecraft] K3: Use AM SYNC on WWV to calibrate DDS?
> 
> 
> 
> K1LI <[email protected]> wrote:
> 
> >
> >AM-S in FW 3.97 works great. I notice that my frequency displays 15.000.024
> >when tuning in WWV on 15MHz and 10.000.16 on the 10MHz signal. (Happily, the
> >displayed frequency is the same on both "sidebands.") The ratio of the
> >15MHz/10MHz received frequencies is equal to the ratio of the 24Hz/16Hz
> >difference between the displayed readings and the "actual" signal
> >frequencies (I trust WWV!).
> >
> >Is there a lesson here that I can use to improve the frequency calibration
> >of my K3?
> >
> >73 -- Brian -- K1LI
> >-- 
> >View this message in context: 
> >http://elecraft.365791.n2.nabble.com/K3-Use-AM-SYNC-on-WWV-to-calibrate-DDS-tp5074859p5074859.html
> >Sent from the Elecraft mailing list archive at Nabble.com.
> >______________________________________________________________
> >Elecraft mailing list
> >Home: http://mailman.qth.net/mailman/listinfo/elecraft
> >Help: http://mailman.qth.net/mmfaq.htm
> >Post: mailto:[email protected]
> >
> >This list hosted by: http://www.qsl.net
> >Please help support this email list: http://www.qsl.net/donate.html
> >
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[email protected]
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
                                          
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Reply via email to