Hi Folks, Thanks for all the replies. Mr Soft Rock, Tony Parks, kindly emailed me all the details through. I will post them here so that people searching the archive can find them in the future:
The K2 specific components are listed below: 4.915 MHz SoftRock Lite II for K2 IF application Then SoftRock Lite II operates with crystal frequency divided by 4. The Lite II center frequency will be about 4.919 MHz and when used with a soundcard that can sample at 48 kHz will give IF band coverage from 4.895 MHz to 4.944 MHz. C10 100pF C11 not used L1 43T of #30 on a T25-2 core (6.4uH) T1 12T of #30 on primary and 6T of #30 on each of two secondary windings bifilar over the top of the primary on a T25-2 core. (0.5uH on primary). C3 180pF C4 2200pF Crystal X1 is 19.68 MHz SMT type with crystal between pins 1 and 3. 73 Steve M0BPQ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
