There was an error in cursor position that affected certain digital modes under certain conditions that has been fixed in beta version 00.29. But other than that the cursors should be accurately showing the actual filter bandwidth of the K3.
The one exception to that is if you adjust the filter shift so that the bandwidth straddles the suppressed carrier frequency. In that case you don't actually hear anything (other than a little feed-through) on the other side of zero beat. Alan N1AL On Sat, 2010-08-14 at 22:07 -0700, Phil Hystad wrote: > Regarding the P3, I am a little confused about the cursor position. For VFO > A, I understand this to be the Cyan colored U bracket like thing at the > center bottom of the spectrum display. > > Last night I was playing around with how this is affected by filter width and > also passband shifting. Now, I believe that when I had the passband shift in > the normal position with a 2.8 KHz filter width that my LSB signal showed the > Cyan cursor being lined up right on the center frequency with the right side > of the cursor border. But today, I am noticing that the cursor overlaps the > center position a little bit. Still LSB, normal position on passband shift > and also the same filter width of 2.8 KHz. > > So, this seems like different behavior and I am not sure which way is > supposed to be the correct way. > > Can someone explain how this is supposed to be and how it might be affected > by various controls. I am wondering if there is some control setting that > might be different to show different behavior. > > Thanks for your help. > > 73, phil, K7PEH > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
