Glenn, That output is fused internally at 600 mA, and is supplied via a 1n4007 diode (1 amp max). Best not to exceed the 500 mA recommended max load. An option would be to supply power to your powerpole strip from the same supply that feeds the K3, but have it switched by a small relay controlled by the Aux DC out of the K3. GL, Bruce N1RX > Guys, > I run a number of accessories from the switched power on the back of the K3. > I run it to a powerpole strip and then just plug in all the items that I > want to power up with the rig. So far I run a W2, an LP-PAN and a 6m > pre-amp. I'd like at add the P3. The K3 plug says 0.5A max, which is what > the P3 draws. So it looks like its either/or. Is there > enough conservatism in the rating of that power socket to add the P3? > Thanks, > Glen, W6GJB
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
