I loaded 4.05 into my k3 last week and it took me a while yesteday to work out why it wasnt decoding 45baud rtty, mine had also changed to 75 baud rtty
With 4.0.5 I can change the monitor level on RX and TX on fsk and afsk Dave ww2r > Date: Sun, 22 Aug 2010 17:29:57 +0200 > From: "Steef PA2A" <[email protected]> > Subject: [Elecraft] RTTY monitor level setting > To: <[email protected]> > Message-ID: <238f35436ba54d3ab9e905973c596...@dell1300> > Content-Type: text/plain; charset="iso-8859-1" > > The RTTY 45 Baud monitor level can 't be adjusted during receive anymore, > only during transmit. Not a big problem but it has changed. > > Further all my 45 Baud RTTY presets were changed into 75 Baud after sending > the 4.03 firmware so I had to change them all. > > 73 's Steef PA2A > K2 & K3 > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
