Hi all, I have new field-test K3 firmware ready with improvements that may be of interest to those using a DVR (KDVR3 option) or the K144XV 2-meter module.
Details: * * * * DVR TRANSMIT MONITOR SEPARATELY ADJUSTABLE: Applies to TX message play as well as TX playback of the 90-second loop. First, set MAIN:TX DVR to IND (independent) and exit the menu. Next, hold in the CMP/PWR knob to select MON. Holding the knob in a second time alternates between MON xx and DVR xx. You can adjust MON or DVR level during transmit playback. * K144XV BAND-DATA OUTPUT ADDRESS RANGE INCREASED: Originally, CONFIG:XVn ADR was always set to “INT TRN1” to enable the K144XV. This set all band-data outputs on the ACC jack to 0. Now, XVn ADR has of “INT TRN0” to “INT TRN9” for the K144XV. Band-data outputs are set accordingly. This may be useful when the K144XV is used as an IF for higher-band external transverters. (If you have a K144XV, the original INT TRN1 will now be INT TRN0 in the menu.) NOTE: When using the K144XV, XVn RF can be set to the RF band of an external transverter that is using the K144XV as an I.F., rather than at the 2-meter band edge (144). * * * Please let me know if you'd like to preview this release. I'm guessing we'll go to beta toward the end of next week. Thanks, Wayne N6KR ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
