Hi Holger, Try another better connector.
I had this problem with a cheap one and try another one and all was OK 73, Jorge CX6VM -----Mensaje original----- De: [email protected] [mailto:[email protected]] En nombre de Holger Meinecke Enviado el: Martes, 31 de Agosto de 2010 04:21 p.m. Para: [email protected] Asunto: [Elecraft] [K3]Err Ptt Hi elecrafters, i have the following problem with k3 2121: I'm using external ptt-in (backside of the K3). At first rarely in qso the trx didn't go back to rx-mode after sending. Usually a blind grip at the backside of the k3 into the cableing or an on /off cycle solved the problem (just moving at the ptt-cable or connector). Right now it starts with err-ptt ( without any cableing but 12v ;O) ). Resistance between ptt and ground is 25 ohms. Someone had this problem (solved?) before? I really don't trust this cinch-stuff Any hints for further investigation ? Regards from northern germany, Holger DL6ABM ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
