Interesting! I have a transflective version of the display (and a metal shaft pot :) just sitting here waiting for a few free hours. I didn't know the stock display could possibly already be transflective! Unforch, while I did think ahead enough during assembly to mount one of the caps that boarders the display on the other side of the board (inside the MCU socket IIRC), I also seem to recall there being a rubber spacer in there that isn't going anywhere while the display is soldered in :). I'm also curious what you're using as a light source / diffuser -- most light bars are too thick, and I haven't been able to find any diffusers of the right size .. I just figured I'd end up winging it with paper or a nip off a plastic cutting board :).

On Thu, 28 Apr 2005, Tom Hammond wrote:

Hi Andrew:

I'm working on a backlighting mod for the K1 and I just happen to have that info...

The K1 manual specifies it as a V.L. Electronics VI-321-DP-RC-S-12 display. however that nomenclature is no longer totally accurate. The VL web site can be found at:

    http://www.varitronix.com/

Apparently, Varitronix is the parent company for V.L. Electronics and this is where the LCDs can be found.

The LCD currently sold by Elecraft for the K1 includes a 'transflective' polarizer which both reflects ambient light AND will allow for a rear-mounted backlight. In fact, I'm presently working on documenting a mod to add backlighting to the K1 LCD display. Watch for it.

73,

Tom   N0SS

At 12:43 PM 4/28/05, you wrote:
I'm trying to find specifications on the 3 digital LCD used on the
Elecraft K1, since I'm working on a custom application that involves
changing it over to a 3 digital LED.

Can someone provide the manufacturer and model information on this
display so I can locate the specs?

Thanks,
--Andrew, NV1B


_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Reply via email to