I am trying to adjust the VCO control voltage on the RF board and having an issue. When the VFO is set to 3500 khz the voltage is around 1.5vdc but the voltage goes above 7.5vdc around 4500khz. I checked c71-c74, and d21-d26 and all are the correct parts. I checked T5 for the proper number of turns, 16 red and 4 green and the windings soldered to the correct hole. The book states I need 16 turns red and 4 green but figures 6-16 and 6-17 both have 14 turns red and 4 green. Which is correct? Is there anything else I can check? -- View this message in context: http://elecraft.365791.n2.nabble.com/VCO-control-voltage-range-tp5498514p5498514.html Sent from the [K2] mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected]
This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
