Jerry, You could use most any connector, RCA jack, BNC, SMA, SO-239. The rear panel space is a bit tight if you have both the K60XV and the K160RX, so just use whatever fits. I personally would not want to use the Receive ANT jack, but you certainly can if that is your choice.
73, Don W3FPR On 9/4/2010 6:20 PM, [email protected] wrote: > > Gang: Just curious if one really needs to use the SMA connector provided > for installation in the K2??? > > Given the location indicated for installation of the board, I can't > imagine > picking up any stray signals is a concern. > > Since I never use the BNC connector for my 160 meter board, figured I > would > use it rather than drilling more holes in the back panel. > > I wanted to make sure I wasn't missing something so thought I would see > what > the pro's think before proceeding. > > Thanks and have a great weekend: > > Jerry N0JRN > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
