"MG" = mic gain. "CP" = speech compression. See K3 Programmer's Reference manual.
Al N1AL On Tue, 2010-09-07 at 15:39 +0000, Ron Lodewyck wrote: > I am setting up to remote control the K3 over the Internet. With its > extensive software command set, the K3 is a great rig for remote > control. However, I cannot find commands to control the level of either > Microphone Gain or Compression. What am I overlooking? > > In addition, I had hoped the K3 would have a built-in Watchdog Timer - a > menu settable maximum key-down time. From a few seconds to at least ten > minutes. This is essential for remote operation to prevent accidental > key-down - for example, if the computer crashes or sends an erroneous > command. Both have happened here during local testing, so I feel a > watchdog timer is critical to safe remote operation of the station. Is > there such a timer in the K3 which I have missed? > > Thanks & 73, > Ron N6EE > > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
