Also, if there is drop in audio using the DSP module, > there is a gain setting to reset that. Look in the archives or ask Dr. > Elecraft, W3FPR! > > 73, de tom bosscher k8tb > -----------------------------------------------------
Thanks for the title Tom! I am honored. But the KDSP2 is one thing I have not gotten into closely, so please direct the KDSP2 questions to Gary (mailto:[EMAIL PROTECTED]) or Lyle Johnson (the guy designed it). In my quick reply earlier, I failed to mention the AGC setting - even if it is set for the manual recommendation of 3.8 volts, it may be too high and hold the gain down. Test by turning the AGC off and on with no signals on the band (if band noise is present, disconnect the antenna), and make certain the DSP de-noiser is not running. If you hear a change in the noise level, the AGC Threshold is set too high. I have seen some K2s which needed the AGC Threshold reduced to 3.65 volts, but most I have encountered do well at somewhere between 3.7 and 3.8 volts. Don't forget to reset CAL S Lo and CAL S Hi after changing the AGC Threshold if you want your S-meter to indicate over its full scale. 73, Don W3FPR -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.11.0 - Release Date: 4/29/2005 _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
