What I learned at the Elecraft booth at Boxboro Convention is that there is no ATU built in to the KPA500. I do not know it there will be an external ATU appropriate to that power lever. No info on the expected price.
73, Ken K3IU ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ On 9/8/2010 3:12 PM, K4SC wrote: > After 45 years on the air, I'm finally getting an itch to bump my power over > 100 watts; 500 - 600 watts seems like a reasonable amount of 75 meter power > for me. I'm seriously looking at amplifiers and tuners, but hesitant to > make a purchase decision before getting at least some warm fuzzies about the > KPA-500 pricing and availability. > > Been looking at a lot of new and used tube based amplifiers and 1KW tuners; > getting the sense that I could spend upwards of $1500 for anything decent. > If the KPA-500 is going to sell for close to that figure, or less of course, > I can probably keep my money stashed and wait a few more months. It sure > would look nice next to the K3& P3. > > If, however, the KPA-500 is going to cost much more than $1500, I will > probably go the tube route. > > So, what I'm hoping to get from someone "in the know" is a ballpark figure > on the KPA-500. I assume the antenna tuner is built in, and not an > additional cost. If that isn't the case, then knowing the ATU cost would > also be helpful. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
