We seem to experience what appears as a software anomaly when trying to listen to 2m on the Main VFO and 6 m on the Sub.
Our club station has a K3 with a sub-rx, a K144XV interal 2 m option and an extermal XV432. A 6 m antenna is connected to Ant2, and HF-antenna to Ant1. The 2m option works fine by itself, as well as HF/6m. When we set it up to listen to a 6 m beacon on the Sub-rx and switch bands through HF/6m/2m/70 cm on the Main rx, then sometimes all works fine. Other times the input signal seems to disconnect from the 6 m sub rx when we come to 2 meters on the main rx, all other combinations are fine (HF/6m/70 cm on the main). We try to use Bset and switch Ant1/Ant2 on the sub, but it does not help, neither does holding RX ant for antenna switching. It is a problem which is kind of hard to reproduce, but it appears often enough to be annoying. So far we cannot predict what combinations of settings that cause this. But I wonder if others have experienced anything similar? ----- Sverre, LA3ZA K2 #2198, K3 #3391 http://www.qslnet.de/member/la3za/K2/mod.html LA3ZA Unofficial Guide to K2 modifications -- View this message in context: http://elecraft.365791.n2.nabble.com/Simultaneously-listening-to-2m-and-6m-tp5521449p5521449.html Sent from the [K3] mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
