Hi Don
You are correct.
After chk'g config fsk pol it was indeed set to zero ie for reverse mode, have
now re-set to one (1)
Thanks you.
Ken..G0ORH k2 k3 p3
CW4EVER
Sent from my iPhone
On 12 Sep 2010, at 13:45, Don Wilhelm <[email protected]> wrote:
> Ken,
>
> If you were receiving him OK, your sideband selection was correct.
> However, you said you were using FSK D data mode. The polarity of your
> transmitted signal depends not only on the sideband you have selected, but
> also depends on the setting of CONFIG: FSK POL. If you have that parameter
> set to "0", the transmit signal will be inverted.
>
> The setting of CW rev is independent of DATA mode settings.
>
> 73,
> Don W3FPR
>
> On 9/12/2010 6:13 AM, ken chandler wrote:
>> Hi Gang
>>
>> Have just worked VQ9LA on 15m RTTY in DATA MD, FSK D. 45 bps it decodes very
>> well, using my Morse key.
>>
>> I tried working him for 10 minutes with 100w, he then works me and told me
>> I'm in reverse mode and he twigged as he knew I was calling so he went
>> reverse his end and worked me.
>>
>> I have not selected reverse mode on my K3
>>
>> The radio is in DATA and LSB.
>>
>> After the qso I pressed the MODE button and noticed that CW was in REV ie
>> rev cw, would this throw the RTTY into reverse mode.
>>
>>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
