Bill, Bill Conkling schrieb am 15 Sep 2010 um 21:29:
> I think what is needed here are two PF keys, one to set the mic up for > FrontPanel, and one for the RearPanel. Each would make the necessare gain, > compression, range, bias and equalization settings for the respective mics. > Perhaps someone familiar with the K3 programming could create this and pass > it on as a tutorial, or script or whatever for newbies like myself I have created two macros for my microphones, Heil headset rear, Icom SM-8 front. The macro for the Heil is: MN053;DN;DN;UP;SWT11;MN255;MG030; The macro for the Icom is: MN053;DN;DN;SWT11;MN255;MG023; The problem is that the High / Low setting is toggled and not saved seperately for the front and rear microphone. I see two possibilities for the developer to solve it: either keep it seperately for front / rear or create a dedicated code for low and high microphone level. I have also asked for this feature and Wayne's comment was positive. I don't know where it is on the list. 73! de Werner OE9FWV -- Das Problem mit den alten Leuten wird nicht weniger obwohl so viele sterben. Aber es wachsen immer neue nach. Email powered by Pegasus Mail free at <http://www.pmail.com> Homepage: <http://www.qsl.net/oe9fwv/> Fone +43 5522 75013 Fax +43 5522 22505 Mobile +43 664 6340014 Fax-Email Gateway +43 820 220262990 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
