What software were you planning to use, MMTTY or maybe DM780. I know MMTTY supports "true FSK" as does the K3. Not sure about DM780. And yes, both of the above use the sound card for receive. The K3 will decode RTTY but the display is limited and as far as I know there is no provision for a remote terminal, so I would go the sound card route.
On your third question, I am curious about that myself and awaiting an answer from one of the gurus. Jim, W4ATK On Sep 21, 2010, at 10:41 AM, [email protected] wrote: > Hi, I'm new to the K3, (Aug 2010 sn 4536). I have really enjoyed it a > lot. I have dabbled into digital modes a bit and am wondering, how do > i connect and send/rec FSK? > > I have determined that I need a cable from PC serial port to the > "accessory" connector and connect to gnd, PTT, and FSK. Do I still use > the soundcard to rec or does the radio have a line out that would > connect to the serial port RX pin? > > Another question. Last night I was messing with PSK, and noticed that > in PSKD mode, the waterfall on Digipan showed a band of activity at > one area of the display, while in DATA A mode, it had shifted a lot to > the left, maybe 1khz. What gives? > > ...bc nr4c > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
