This might be something obvious I am overlooking.
I have experienced a few instances of the sub RX tuning knob freezing. I spin the knob but the frequency does not change. Sometimes turning the unit off and then back on gets things moving again. I have tried linking and unlinking the sub Rx. No change. I suspect I have done something with a menu or control setting but I don't know what I could have done. The radio is equipped as follows: K3/100 KAT3 KRX3 KXV3A KDVR3 KBPF3 (in main Rx) Main has 13, 6, 2.8, 1.7 and 250 filters Sub has 6 and 2.8. I am powering off of an Astron RS-35M with a battery backup monitored by a West Mountain Powergate PG40s. Because I am using AGM backup batteries, per instructions the voltage setting of the RS-35m was increased to 14.5 volts. The radio had a full factory workover in June and should be in good operating order. I am using the latest beta firmware. I DO NOT have the P3. I am wondering if it is the firmware, I don't recall this happening before. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
