Is it also possible that you're turning off your rig by shutting off the power TO the rig without using the Power "off/on" button (I.E. Just turning off the power supply). I belive that you have to save the settings at least ONE time by doing a proper shut down on the K3, and not just killing power to the rig. I've found settings get lost if you don't. Just an idea. Like a computer, you can't just "Crash" it when you're ready to stop using it. > From: n...@elecraft.com > To: ke...@lamonica.com > Date: Sun, 26 Sep 2010 09:08:38 -0700 > CC: elecraft@mailman.qth.net > Subject: Re: [Elecraft] K3 CW Sidetone > > Keith, > > This shouldn't happen. I test this on every firmware release, and just > tested it again. Enter CW mode, then hold the SPEED/MIC/MON knob in to > bring up sidetone MON level, then adjust it. Tap the knob to return to > normal operation. Changing modes and possibly readjusting the MON > level for that mode should have no effect on the sidetone level. > > If this isn't working, please contact k3support on Monday. > > 73, > Wayne > N6KR > > > On Sep 26, 2010, at 8:56 AM, Keith Lamonica wrote: > > > Can the sidetone monitor level be set to a fixed level? Mine > > defaults > > to 4 when I change modes and then come back to CW. > > > > Keith, W7DXX Remote > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
