Ian, One set of washers is needed as a spacer - so just do it the easy way - when you mount the standoffs onto whichever board they are mounted to first, put the washers between the board and the standoff. When you put the second board on the other end of the standoffs, put the lockwasher under the screwhead.
Now when you remove the screws from the standoffs, always remove the screw with the washer under the head - it is a bear to align the washer between the standoff and the board if the standoff is mounted at the other end. 73, Don W3FPR On 9/26/2010 4:19 PM, Ian Liston-Smith wrote: > My KAT2 errata dated 25 Feb 2010 shows the washers between the standoff and > the board, but the text says put between the screw heads and the board. > Normally I'd think it wasnt that important and the washers are just used as > spacers, but in case the space is tight when putting it all together which is > right, the text or the picture? > > Come to think of it, it must matter or there wouldn't be an errata to change > it. Is it just that the diagram hasn't been changed to match the text? > > Thanks, > > Ian, G4JQT > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
