I'm not sure if this will work for you, but I did accomplish writing a couple of macros last night that will switch the mic from front to rear and update the tX EQ accordingly. now i can have both my headset and hand mic avail at the press/hold of a front panel button. this might work for you. Leave the mic on the front, and switch between the mic and the TNC onthe rear mic/phone plugs.
...bc Quoting Tim Tucker <[email protected]>: > Is there a way to configure the rear mic and rear speakers to work as an > additional line in/out while the front mic is also active (similar to the > regular line in/out). > > Here's the situation: I have the line in/out rigged up to the PC for > soundcard modes. However, I would also like to hook up a TNC for > Amtor/Pactor ARQ modes. It wasn't very long ago that it was quite common on > our MARS nets to pass traffic in both Soundcard (MT63) modes and then again > in ARQ (Amtor or Pactor) for stations that needed it. Under this scenario, > the operator must be able to address the net by voice and quickly change to > the other modes as needed or requested, and then back to voice; there is no > time for fooling around with menu options to switch mic inputs. I can see > this also being necessary for any operator that needs to operate MARS > digital nets using both a Pactor III modem and Winmor (soundcard tnc) modes. > > > On my Icom 746 Pro, I have more than one AF in/out on the rear panel, so > having both a TNC and soundcard hooked up and using them both within seconds > of each other is trivial. Is there a way to do this with the K3? > > Thanks for any suggestions, > > Tim > AE6LX > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html

