John, I believe you have caught a different bug. The usual failure is that the headphones still work, but the speaker does not - sometimes the speaker stays on even though the headphones are plugged in.
It sounds like you have just lost all audio, and the reason for that can be widespread throughout the receiver. Does the S-meter move? If so that rules out a failure prior to the 2nd Xtal filter. A signal generator and a 'scope would be helpful for your Receiver Signal Tracing (see Appendix E in the manual). If you have neither, consider building the signal generator shown in the manual and the RF Probe. 73, Don W3FPR On 9/30/2010 1:09 PM, John Grimm wrote: > I went to plug in my headphones this morning to the headphone jack, and > immediately lost all audio to both the headphone out jack and internal rig > speaker. Would this be a typical symptom of the oft-referred to K2 headphone > jack failure? If so I believe I've now caught the bug... > > Thanks much for any feedback. > > John / K0YQ > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
