Dan WG4S wrote: Ron forgot to mention that the only "fix" for the deaf on 80 is to spin the VFO back down into band (or a reset - arrrgh).
------------------------------------- No, that's not needed, at least not with current firmware (2.04). Just do a "direct frequency entry" to put the rig back within the band: Press BAND+ and BAND- simultaneously and note a row of -------- across the frequency display. Now enter a frequency on the numeric keys and the rig will automatically go to that frequency with all the relays enabled properly for that band. For any operators who haven't used direct frequency entry, the rig shifts the moment you have the frequency entered. Note that for 160 meters, it's necessary to enter a zero first to the logic won't confuse 1.8 MHz with 18 MHz. Ron AC7AC _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
