Pippo, It looks correct to me. Only the smaller part of the legs go into the solder holes.
73, Don W3FPR On 10/12/2010 3:35 AM, IZ2NYY wrote: > Hy all, perhaps i've seen something wrong!! On the whole photos i've found on > the web the potentiometer R1 is soldered just attached to the board, but i > don't know how to do this cause to the fact that the R1 has "legs" that are > 1.5 to 2.0 mm width and the holes for this components on the board have a > diameter of 1.1 mm. Just the first part of "legs" are of the right measure > and installing R1 as it is would leave the component about 3.5 mm high over > the board. I don't know if i see something wrong on he images and all R1 are > high off the board of there's somenting more to do on the component to be > well installed. > > http://it.tinypic.com/r/4rcmlc/7 > > Tnx for help > > ----- > Pippo > IZ2NYY ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
