You might use a macro that sends an UPn; or DNn; command where "n" is
1 for 10 Hz 2 for 20 Hz 3 for 50 Hz 4 for 1000 Hz 5 for 2000 Hz 6 for 3000 Hz 7 for 5000 Hz 8 for 100 Hz 9 for 200 Hz See the K3 Programmer's reference under the DN/DNB command. Dick, K6KR -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Pete Smith Sent: Tuesday, October 12, 2010 2:36 PM To: Elecraft List Subject: [Elecraft] [K3] How to program quick 100 or 200 KHz QSY I've been digging in the archive but can't figure out how to program quick memory buttons to provide a quick 100 or 200 KHz up/down QSY. This the one and only thing I miss about my Mark 5. I know about Fine/Coarse and spinning the knob, but would like to find a better way -- 73, Pete N4ZR The World Contest Station Database, updated daily at www.conteststations.com The Reverse Beacon Network at http://reversebeacon.net, blog at reversebeacon.blogspot.com, spots at telnet.reversebeacon.net, port 7000 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
