Hi Ian, The I.F. blanker should be run at the lowest effective level. It is intended for use on short-duration, high-energy pulse noise.
You might try using the DSP blanker first. Since it is post-crystal- filter, it cannot cause mixing to occur between multiple signals outside the filter passband. Typically a combination of the I.F. and DSP blankers and the NR will be the most effective. 73, Wayne N6KR On Oct 13, 2010, at 8:06 AM, g0afh wrote: > Hello, > > Primarily I use my K3 to drive transverters for the higher bands. I > transvert to 2m from 20m using the transverter interface on the k3. > > Conditions on 2m have been enhanced in recent days so there a few big > signals on the band. Last night I needed to use the NB to deal with > some > local power line noise. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
