The RS-232 cable between the P3 and the K3. You could make a box with a DPST switch or relay to open the TXD and RXD lines if you don't want to unplug the cable. On the other hand, how often do you adjust TX EQ? It would probably be easier just to unplug the cable than to build a switch box.
Alan N1AL On Mon, 2010-10-18 at 17:42 -0400, Bill Conkling wrote: > For those who want to use the P3 to adjust TX EQ, what lines need to be > disconnected from the RS-232 circuit. Should be easy to make a box with a > switch to disable certain lines without having to disconnect the cable > between the P3/K3. > > > > Maybe could be triggered by the "Key Out" signal, or just a simple toggle > switch. > > > > Better still, add it to the P3, or offer it as a 'fungtion key'". > > > > ...bc > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
