Just received the P3. Connected up the K3-P3 and logging computer with TR
working. I read and understand the difference in rate between the baud rates
between the K3 and P3 (38,400) and the P3 and whatever the computer program
needs. ( in this case 4800 as that is the fastest rate TR will take). When I
query the P3 with the K3 utility it reports the speed for the P3 at 4800 after
I set it for that speed on the P3. The TR program doesn't communicate with the
P3 even though the rate is correct. When I turn off the P3 and reset the K3
rate to 4800 it works perfectly.
A few questions:
1) Does the P3 emulate the K3 as in using the Kenwood protocol for
communication or is it a new animal that maybe TR doesn't recognize?
2) Anybody have the K3-P3-TR logging program functioning all together?
3) What am I not seeing wrong here?
4) Yes I know I should get a non-DOS logging program but my current
configuration really works well and I hate to fix it because it isn't broken!
Tnx- 73 and I remain,
Lew W7EW
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
