I got one of these about 6 mos. Ago. It is excellent, with 4 interchangeable pairs of lenses in two mounts that can be flipped up or down in combination to provide varying magnifications. The only problem is the *current* price. When I bought, it cost $17.50, including shipping. Maybe they'll have another special sometime.
http://www.seelarger.com/magnifiers/headvisorwc.htm BTW, I agree about the benefits of a visor over a swing arm magnifier. My bench is cluttered enough with obstacles and I don't need to insert another one between me and my target. 73 de NNØB --Steve -----Original Message----- From: Tom Hammond [mailto:[EMAIL PROTECTED] Sent: Thursday, May 05, 2005 06:57 To: [email protected] Subject: RE: [Elecraft] Swing Arm Magnifiers - OT Gotta agree with most of the posts here... regardless of whether I use a MagniFocuser (my personal preference) or an Optivisor, I find the head-mounted magnifier to be MUCH more suitable for my particular type of building than the swing-arm-type lighted magnifiers... T he swing-arm maggies just always seem to be in the wrong place every time I need to use them, and always in the way when I don't need them at that instant. They also seem to tend to be 'jiggley' and never remain as stable as I need them to be. As a result, I've never found a swing-arm maggie (with all due respect to K3XS <G>) that I've liked or found to be useful in my personal manner of building. Regarding magnification level... I recently bought a second head-mounted (MagniFocuser) magnifier. This one was a bit 'hotter' (#10 lens, 3.50X) than my venerable older one (#7 lens, 2.75X) of about 25 years. What I found when I put it on, however was that I kept trying to solder my nose!!! I found the 3.50X lens has a focal length of 4", while the 2.75X lens has a focal length of 6", which put the nose and soldering iron at much safer distances between each other!!! I now use the 3.50X lens for close-up examination, and the 2.75X lens for building... MUCH MORE COMFORTABLE. What I'd REALLY LIKE is one of those eyeglasses with the specially mounted lens magnifier which allows for relatively high magnification (say, 3.5X), BUT at a longer focal length... say 10" - 12" instead of risking more 'nose branding' by the soldering iron tip. But all of those I've found are much too costly for my cheapskate wallet. 73, Tom Hammond N0SS ******************************* The information contained in this message may be privileged and/or confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. Note that any views or opinions presented in this message are solely those of the author and do not necessarily represent those of Ameren. All emails are subject to monitoring and archival. Finally, the recipient should check this message and any attachments for the presence of viruses. Ameren accepts no liability for any damage caused by any virus transmitted by this email. If you have received this in error, please notify the sender immediately by replying to the message and deleting the material from any computer. Ameren Corporation ******************************* _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
