Hi Mark Try reducing the bandwidth further using the width control, then the DSP filtering will be responsible for narrowing the bandwidth. You could also try adjusting the shift control to slide the passband one way or the other. Although I have all my filter slots filled, I never use the xfil button to change width, just the width control. The effect is the same.
Yes, it's a lovely radio, and I came from a TS480 too, via a K2 that is :-) 73 Stephen G4SJP On 28/10/2010 11:41, "[email protected]" <[email protected]> wrote: > > > I purchased a K3 with the standard 2.7 Khz SSB filter plus the 1.8 Khz SSB > filter. I did not purchase a cw filter because I operate very little cw. But > that may change. The 2.7 is in slot #1 and the 1.8 is in slot #2. I know > that if I push the FILT button that I can switch filters. But I was > experimenting around listening to a weak station that was rather close to a > real strong station and when I activated the 1.8 Khz filter I was still > getting some carryover from the strong station on the weak station. Are there > other controls that I need to use that would enable me to knock out the real > strong station so that I could clearly hear the weak station? I'm sure there > is help in the manual but I certainly can't find it. Any help would be much > appreciated. Oh and by the way, I love the radio. It's like a breath of fresh > air compared to my Kenwood TS0480s. Mark KB3Z > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
