Hello fellow Elecrafters, Quick question - I've noticed that when using the LPA, output power is always slightly off compared to the reading given off by two fairly accurate meters. For example, a constant carrier output of 5 watts always reads about a half-watt less on the external meters. The output power from the KPA3 however has always been on the dot - 80 watts drive reads 80 on the meter, 100 watts output reads 100W on the meter, etc. etc.
I'm not really concerned, but was wondering if this was typical? I've calibrated several times in the past using the K3 utility, but the results are usually the same. -- 73 de James K2QI President UNARC/4U1UN ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
