On 10/29/2010 6:30 PM, Phil Lonzello - WA6LDI wrote: > Any suggestions as to the proper > mic/compression settings I can use to prevent overdriving my amp? Thank you > for whatever suggestions you can recommend.
The instructions are exactly the same as I posted two days ago for the other mic. Your TVI problems may be the result of using ALC to control power. That is a very bad idea. NEVER use ALC to set the amplifier power. ALWAYS set the drive power to the amplifier by adjusting the POWER control on the K3 to get the desired power out of the power amp. Use ALC ONLY to protect the amp from problems when something goes wrong (like something breaks in your antenna system, or you goof in tuning or switching the antenna (we all do that). 73, Jim K9YC ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
