Even the mic dynamics came back to normal compare to 4.17, I confirm the same difference between 4.18 and 4.14 and about the APF if moving the Shift to 1khz a big click then nothing. Need to go down to 280 HZ to restart the APF. 73's Philippe A65BI
>>> "Geoffrey Downs" <[email protected]> 06-11-2010 19:02 >>> Hi Lyle, SSB output is certainly improved in F/W 4.18 compared with 4.17 but contrary to what some others are saying it seems to me still to be down compared with 4.14. This morning I did a tx gain calibration and noted output from the amp under 4.14. I then installed 4.18, cycled power on and off and did another tx gain calibration. With all settings unchanged it was around 15% down on 4.14. Can anything more be done? Credit where it is due, however, the APF feature is excellent, although I do not often use CW so have gone back to 4.14 for now. 73 to all Geoff G3UCK ----- Original Message ----- From: "Lyle Johnson" <[email protected]> Subject: [Elecraft] New K3 Beta Release: APF for CW, "Fast Monitor" & improved TX gate for voice modes K3 beta-test firmware revision 4.18 (with DSP rev. 2.67) is now available. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
