One of the three new K3's we purchased for use at our state RACES station has no TX audio. All three were unpacked today, and, the first one to see the light of day (and, an antenna) doesn't know it has a mic attached to it. The PTT works, there's just no audio at all into the rig. Nothing is heard via the monitor, no ALC action, nada. The transmitter is working as it generates 100W of CW. The ops are reporting that they simply have no TX audio.
The other two K3's worked normally when hosed up to the same mic. I've had the ops walk thru the quick set-up chart, checking the CMP/ALC and mic gain settings a couple of times with the same result each time. I'm not with the radios, so, having to do some coaching from the sidelines. Suggestions? 73 Brad, W9FX ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
