Don, thanks! 6-32 did fit but with a little wobble. I just went downstairs and ran a known 6-32 nut up a known 6-32 stud and it also wobbled a bit!
So 6-32 it is after all! Funny how one can fail to notice the obvious for so long... Guess I've spent too much time messing around with plastic insert locknuts. They do NOT wobble! 73 and thanks again for confirming the nut. Stan Levandowski WB2LQF HF QRP CW -- Doing more with less for over 50 years! QCWA #35038 OOTC #4558 NAQCC #4740 SKCC #6488 FISTS #14992 On Sun, Nov 7, 2010 at 8:07 PM, Don Wilhelm wrote: > Stan, > > Since you could not find a match, I would be suspicious of your > hardware store's stock. > It is 6-32 threads - I just threaded a 6-32 nut onto one of the > thumbscrews. > > 73, > Don W3FPR > > On 11/7/2010 7:41 PM, stan levandowski wrote: >> Can anyone tell me what size nut will properly fit the little screw >> that >> secures the paddle to the KX1? >> >> I'm working on a project to fabricate a stand-alone mount for the KX1 >> paddle. I know a 4-40 machine screw fits nicely through the bottom >> hole >> and also could be used through the top (threaded) hole, but I'd >> rather >> try to make use of the stock "thumb-and-forefinger-operated" screw to >> preserve the ability to move the paddle back and forth to the KX1 >> quickly and without tools. >> >> I brought the paddle to a hardware store today and nothing seemed to >> mate properly with it !! >> ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
