While we're on the subject, there are occasionally reports of a "reverse" glitch too. That is, when sending with paddles using the internal keyer in Iambic mode, instead of getting the expected alternating dit-dah (or dah-dit) you get a steady key-down carrier as long as you squeeze the paddles!
That's also *normal*. To do that, the operator needs to close (squeeze) both paddles simultaneously! The logic is set up to detect a simultaneous closure as a straight key input so it disables the keyer logic! It's really quite rare. I played around with the K2's keyer (nice!) quite a bit when I first built S/N 1289 and managed to make it happen only after reading about it on the reflector. The closure of both paddles has to be very nearly at the same instant. Ron AC7AC _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
