K2 s/n 6905
I have just got to the 40-metre TX alignment and peaked up L1/L2; minor
issue/observation.
The power output varies sometimes when [TUNE] is selected. Set to 2W and
sometimes it's about 1.5W and sometimes 2.5W.
I've checked the output on a 20 MHz scope and there is no obvious instability.
Battery 11.7, volts current about 1.26A when on higher output and about 1.1A
when it's jumped to the lower output. I have not seen this change during TUNE,
just when hitting TUNE, rx, TUNE, etc.
When adjusting the power control and looking at the output on the scope, there
are discrete jumps rather than a smooth variation. Presumably this is normal,
but if the power setting is set on the edge of a 'jump' then maybe this is to
be expected...? Seems a bit strange is this is the case. Maybe it does not
occur in normal use?
I have had a quick look in the archive ("power varies") but not found anything
that really matches these symptoms.
Any thoughts?
Thanks and regards,
Ian, G4JQT
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
