Hi, I looked quickly ahead and didn't see an answer so here's my 2cents worth.
I'm not a STeppIR user, but from reading this and other reflectors, I think STeppIR make a RS232 "Y" cable that allows the radio on someother divice to talk while the STeppIR controller only listens, not taking an active part in the 'conversation'. This allows the logging program to work in that the logger will ask for frequency information, and the STeppIR controler hears the request/answer and responds. Check this out on the STeppIR web site. ...bc nr4c -----Original Message----- From: [email protected] [mailto:[email protected]] Sent: Friday, November 12, 2010 5:37 PM To: [email protected] Subject: [Elecraft] K3 P3 and SteppIR controller Good afternoon to the group. How do I configure the K3, P3 and SteppIR controller so that the K3 P3 will cause the SteppIR to change bands. Before the P3 I had no trouble controlling the SteepIR with the K3. 73, Steve ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
