Mike, Use the Fluke. You will have to measure about 1 amp. Do it just like the manual says. You will probably have to make several trials until you get it right. The current rises quickly, and with a digital display, the first reading flashed is not valid, so wait until the 2nd or 3rd update from the Fluke.
Hint - if typical, the adjustment pot will end up at about 1/3 rotation from fully counter-clockwise. 73, Don W3FPR On 11/14/2010 5:58 PM, VE3WDM wrote: > Thanks very much Don....Weird thought that was what I was doing but seems > not. I did as you said and all checked out with the fan speed just fine. Now > it is on the the Bias currant adjustment going to use an DMM for this oneI > have a Fluke that can be configured for 10 amps the other options is only > 400ma rated. > Thanks Don ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
