I've noticed the following problem for the past couple of releases of K3 and P3 software. Since my P3 is fairly new, I don't know if it's always been there or not. I'm running the current software on both K3 and P3.
When I turn on power to the K3, the P3 comes on, too. Often, the display of the P3 will be incorrect. For example, if I'm in USB mode, the u-shaped cursor (not sure what to call it) that shows the current passband of the filter might show it centered (as in CW) or to the left of center (as in LSB). The other day, I powered on in CW mode and the cursor was off to the right of center. The "fix" is to change modes or bands on the K3, and the P3 will immediately correct itself. After that, it's correct for as long as the K3 is powered on. It's such a minor annoyance that I didn't bother reporting it. But after a couple of s/w releases and no change, I figured I'd better report it. Has anyone else seen this? Michael N6MEF ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
