I use the K3 Freq. Memory Editor sw to program up to 99 memories with specific freq./modes for quick switching. This is loaded via the RS232 port into the K3. Then all I do to change bands/modes is to press M>V and rotate VFO-A to select memories 00-99. I have them grouped for favorite freq. in each band and mode: e.g. 51=14.020/CW, 52=14.070/DATA, 53=14.205/USB, 54=14.292/USB, 55=14.345/USB, and 56=15.000/AM ...etc. There are enough memories for me to add favorite 6m, 2m, and 1296 freq./mode memories. The last two bands require that the KV3A is set up using the XVn configuration settings (but that is another subject).
73, Ed - KL7UW, WD2XSH/45 ====================================== BP40IQ 500 KHz - 10-GHz www.kl7uw.com EME: 144-800*w, 432-100w, 1296-testing*, 3400-winter? DUBUS Magazine USA Rep [email protected] ====================================== *temp not in service ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
