Using NR on 40m in noisy SSB conditions I have tried many combinations. The best I have found so far is the 6-1 ~ 6-3 range, with AF & RF at max at 6-3 to get the weaker signals through very high noise levels we currently experience here on 40m.
I previously used the 8-x & 7-x range as it had less effect on audio quality, but found it not as effective on static crash noise as the 6-x range with reasonable signal intelligibility. If the noise can be transferred to a more transparent sound retaining reasonable audio quality and level,then that would be great. I would hope more testing could be done to improve NR on the K3 in the future. I do usually decrease RF gain for the best result before using NR at all, and try to avoid using NR until the noise becomes just too much. Adrian ... vk4tux ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
