RF Space offers the IF-2000 interface, which installs in an FT-2000 and converts the 65.45 MHz IF to a 10.55 MHz output, suitable for a panadapter:
http://www.rfspace.com/RFSPACE/IF-2000.html I haven't tried it, but it should work fine with the P3. As far as using the same P3 with both a K3 and an FT-2000, that would work if you swap the IF IN coax or use an RF switch to switch between the two transceivers. The P3 doesn't talk to the FT-2000 over RS-232, so there's no need to switch that cable. If you leave the cable connected to the K3 and leave the K3 turned on, it will look a little strange when switched to the Yaesu since the P3 display will still be reading out the K3 frequency but showing the signals from the FT-2000. In addition to switching the IF cable you also have to switch the P3 IF frequency to 10.55 via MENU:Xcvr Sel. Alan N1AL On Wed, 2010-12-01 at 22:44 -0600, Jeff wrote: > Oops, it was very graciously brought to my attention that the FT-2000 does > not have an IF out > but rather has a proprietary interface for the DMU-2000 so I guess that idea > is out the window. > > Thanks, > > Jeff, N0OST > > > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Jeff > Sent: Wednesday, December 01, 2010 8:58 PM > To: [email protected] > Subject: [Elecraft] P3 with Yaesu FT-2000 and K3 > > This may have been covered but I didn't find anything in a search. > > I don't have a P3 yet but was curious if it possible to use the P3 with the > K3 and FT-2000 and somehow be able to switch between the two radios > > without having to switch cables? Maybe using some sort of a switch box. > > > > Thanks, > > Jeff N0OST > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html

