I'm assuming however that a 2 circuit plug into a 3 circuit adapter should be fine; i.e. plugging a 3.5mm mono plug into 1/4" stereo to 3.5mm stereo adapter, which is then inserted into the 1/4" phone socket?
Tnx, James K2QI On Fri, Dec 3, 2010 at 2:14 PM, Jim Brown <[email protected]> wrote: > On 12/3/2010 8:29 AM, James Sarte (K2QI) wrote: > > Just wanted to get some advise before I continue with my experiment. > > Two-circuit 1/8-in plugs should NOT be used at the output of the K3. A > 3-circuit plug is needed. Nearly all pre-made patch cables are junk, and > many are wired wrong for our uses. We are hams. We can MAKE our own > patch cables, and we can study the schematics to see how to wire them. > Elecraft schematics are on line. Good quality 1/8-inch connectors are > made by Neutrik and Switchcraft, and are available on line from good pro > audio vendors like Full Compass Systems in WI. I use miniature coax to > build them (like RG174, etc.) > > For part numbers, see http://audiosystemsgroup.com/HamInterfacing.pdf > There's a table on one of the slides. > > 73, Jim Brown K9YC > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > -- 73 de James K2QI President UNARC/4U1UN ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
