Tom, I think you can use PF1 or 2 to select the APF. This will still require a "hold", and an inadvertent tap will interfere with the RIT setting. Don't know if this will be better. I don't use my RIT so I like this set up. Maybe a "slight" firmware change would allow each user to define which function is "tap" and which is "hold". I probably should have put a "grin" symbol after that one! :-)
73, Rick Dettinger K7MW On Dec 5, 2010, at 11:54 AM, <[email protected]> <[email protected]> wrote: > Why was the XFIL button chosen to enable APF? Is it because you > can't have APF and Dual PB at the same time? This weekend I found > myself inadvertently changing the XFIL instead of enabling APF. > Pileups get quite interesting when switching to a 2.7kHz roofer by > mistake. > > I would have preferred using the AFX button for enabling APF, since > it is an audio effect and the second function doesn't apply to CW. > > 73, > Tom N2CU <>< > K3 #3582 > -- > 73, > Tom N2CU <>< > K3 #3582 > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
