You certainly can do that. All you have to do is write a macro containing the command "SWH29;" and assign this macro to one of the programmable keys, M1-M4 or PF1 or PF2. You can just use a single command in a macro if that's all you want.
Sometimes I'll assign a macro to both the tap and hold function of a memory M1-M4 so as to avoid the chance of getting the wrong one in the heat of a DX pileup. 73, Chuck Guenther NI0C K2, K3, P3 Rich Dettinger, K7MW, wrote: "I think you can use PF1 or 2 to select the APF. This will still require a "hold", and an inadvertent tap will interfere with the RIT setting. Don't know if this will be better. I don't use my RIT so I like this set up. Maybe a "slight" firmware change would allow each user to define which function is "tap" and which is "hold"." ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
