Nate, Are you looking at the K3 Programmer's Reference Rev C13? That version shows the MCnnn command to be either a GET or a SET. I have not tried it, but it does not seem to be limited to reading only the memory in use. The 'nnn' value gets more complicated if you are trying to retrieve the "quick memories" or if the memory entry is flagged for scanning.
73, Don W3FPR On 12/6/2010 7:15 PM, Nate Bargmann wrote: > I know there is the K3 Memory Editor for Windows with .NET, but I am > curious about the commands used to read and write the memories to the > K3. The Programmer's Guide is mum on this only offering the MC command > to read which memory is in use or set a specific memory channel. What I > don't see is a way to query the programmed memories and update or write > new ones to the K3. Will this information be made available in an > updated Programmer's Guide? > > 73, de Nate>> > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
